Narbonne V VT
Vertical designer radiators

Narbonne V VT

Vertical design radiators V VT are composed of several interconnected profiled steel heating elements of a rectangular cross section. Narbonne V VT convectors are equipped with two side covers, but no top masking grille. The heating profiles are mounted vertically, so that to retain the 2 mm-wide distancing between each two, necessary to compensate for the heat expansion of the elements, and enabling the perfect varnish cover of the entire convector’s surface. Most models are equipped with convective elements, increasing the heating efficiency of the convectors Accessories: plug and air vent, thermostatic valve insert included in the convector's kit . Colour: RAL 9016, other RAL colours available on request. Warranty: 10 years.

Properties
Max operating temperature °C 110
Standard EN 442
Connection dimension 2 x G 3/4 + 4 x G 1/2
Pressure rating PN5
Material Steel profile
Standard colour White RAL 9016
Connections (ETIM) 88
Types -; 10; 11
Heights [mm] 1200; 1400; 1600; 1800; 2000; 2200
Widths [mm] 214; 286; 358; 430; 502; 574; 646; 718; 790; 862

ETIM 88 RL Vertical connection

ETIM 88 RL Vertical connection

ETIM 11 LR Vertical connection

ETIM 11 LR Vertical connection

ETIM 11 Bottom connection, in-right-out-left. Bottom connection via integrated leash requires the use of a valve insert. Unused connections are plugged.

ETIM 11 RL Horizontal connection

Purmo radiators are warranted for a period of 10 years* from date of purchase against all manufacturing defects when they are used in normal conditions and for a heating system with hot water. The warranty does not apply to defects caused by installation or handling errors, misuse or factors external to the radiators, such as water quality or oxygen-permeable pipes.
Underfloor heating products and piping systems elements are warranted for a period of 10 years**.
* 6 years for galvanized radiators and 2 years for all electronic and electric components and spare parts sold separately (side covers, top grilles, plastic clips, plugs, air vents, fixing parts)
** 30 years for PexPenta pipes

10 year warranty

CE certificate

CE.png
Files
DocumentCategory
Technical data sheet Technical data sheet
Accessories

Bleed screw

Bleed screw for Purmo and Thermopanel radiators.

Repair paint

Repair paint in RAL 9016

Bleed screw and dummy plug set

Bleed screw and pre-chromed plug in dim G15 with O-ring

Air screw

Air screw for bleeding of radiators.

Plug G 1/2

Pre-chromed plug in dim G15 with O-ring.

Touch-up spray

Touch-up spray 150 ml in RAL 9016.

Wall bracket WA

Wall brackets for Narbonne convectors

Wall Console FT Cover

Wall console cover for Narbonne convectors.

Evosense

Evosense is a self-actuated adjustable thermostat to provide the best possible regulation of room temperatures. The set value is shown in a window on the thermostat, with a standard range of 0-28°C, but can be delivered from the factory with a higher or lower threshold.

Actuator 24V NC

TempCo 24 V actuator for Purmo underfloor heating with single-zone receiver.

Radiator manifold Evoflow

Radiator manifold with low enviromental impact.

Thermostat Evosense Remote

Evosense thermostatic head with remote sensor connected with capillary tube.

Actuator Move 0-10V

The MOVE motorized actuator is designed for regulating MMA's valves with M28x1.5 or M30x1.5 connection and to be used togethter with thermostats enabelling modulating output (0-10V) to ensure precise and accurate control.

Description The MOVE actuator with high actuating power is suitable for valves with M28x1.5 and M30x1.5 connection. The actuator is a motorized actuator that adjusts the valve steplessly. The actuator adjusts itself to the correct stroke for each valve, between 2-8.5 mm.
Room controller with continuous output (0-10V) in individual room control systems.

Evosense ENTL

Evosense ENTL thermostat is used to regulate valves for heating and cooling in radiator systems, cooling systems and towel warmers.